Assembly

Clean the mounting area with Primer adhesion promoter

Remove the protection strip from the tape and press the base firmly on the helmet*

Insert the GoPro mount in to the helmet mount. Attach safety mount to camera

Insert the Velcro strap into the locking hole, insert the GoPro into the mount and tighten

* The helmet attachment has been tested on over 20 different helmets with a smooth surface. The fit has been perfect.

A 0.8 mm double-sided tape is mounted in the helmet attachment. Should it turn out that the fit of the helmet and the helmet attachment is not perfect, a stronger (thicker) tape must be used.

The set comes with a 1.5 mm tape that will replace the 0.8 mm tape that is already on the mount.

If you have a helmet that does not have a smooth surface (example Icaro Nerv) the FlySafy™ helmet attachment with double-sided tape cannot be used. The helmet mount must then be attached with silicon glue or similar. This is not included in the set.